The kinetics of hydrolytic polymerization of ε-caprolactam. II. Determination of the kinetic and thermodynamic constants by least-squares curve fitting

The kinetic and thermodynamic constants of the hydrolytic polymerization of ?-caprolactam were determined by least-squares curve fitting. The calculations were carried out using observed kinetic data such as concentration of ?-caprolactam ([CL]), endgroup ([EG]), and ?-aminocaproic acid ([ACA]) and time derivatives of each concentration (rates) ?[CL]/?t, ?[EG]/?t, and ?[ACA]/?t. The sets of the converged constants are obtained for the initial water concentrations of 0.42, 0.82, and 1.18 mole/kg. An averaged set of the constants applicable for this range of the initial composition was also evaluated. The compatibility between observed and calculated concentration and rate curves was improved by the use of the newly developed sets of the constants. The mechanism of the polycondensation reaction is also discussed, based on the rate and kinetic constants obtained by this work.     

Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.     

Determination of captafol,cyhexatin, 1-naphthylacetic acid and quintozene in apple,Japanese pear and melon by simultaneous extraction

A simple and rapid method is described for the determination of the non-registered pesticides, captafol, quintozene (PCNB), cyhexatin and 1-naphthylacetic acid (NAA), in fruits. These pesticides were extracted with acidified acetone, then captafol and PCNB were purified with a Florisil mini column and analyzed by GC-ECD. Cyhexatin was ethylated with ethylmagnesium bromide, and the ethyl derivative was analyzed by GC-FPD (Sn filter). NAA was purified with liquid-liquid extraction and determined by HPLC equipped with a fluorescence detector. These analytes were identified with GC/MS or LC/MS. The minimum identified concentration of the pesticides was below 0.2 ng per injection, which corresponds to a detection limit of below 0.02 microgram/g in the original samples. Recoveries of the pesticides spiked at 0.1 microgram/g into apple, Japanese pear and melon were greater than 61%.     

Fourier synthesis image reconstruction by use of one-dimensional position-sensitive detectors

An improvement of Fourier synthesis optics for hard x-ray imaging is described, and the basic performance of the new optics is confirmed through numerical simulations. The original concept of the Fourier synthesis imager utilizes nonposition-sensitive hard x-ray detectors coupled to individual bigrid modulation collimators. The improved concept employs a one-dimensional position-sensitive detector (such as a CdTe strip detector) instead of the second grid layer of each bigrid modulation collimator. This improves the imaging performance in several respects over the original design. One performance improvement is a two-fold increase in the average transmission, from 1/4 to 1/2. The second merit is that both the sine and cosine components can be derived from a single grid-detector module, and hence the number of imaging modules can be halved. Furthermore, it provides information along the depth direction simultaneously. This in turn enables a three-dimensional imaging hard x-ray microscope for medical diagnostics, incorporating radioactive tracers. A conceptual design of such a microscope is presented, designed to provide a field of view of 4 mm and a spatial resolution of 400 microm.     

Detection of characteristic signals from as-doped (<1 at.%) regions of silicon by transmission electron microscopy and convergent-beam electron diffraction

Characteristic signals were detected from As-doped (< 1 at.%) regions of silicon by dark-field transmission electron microscopy and convergent-beam electron diffraction. A slight intensity increase was observed in 220 dark-field images, which may be explained by an increase of scattering amplitude due to the As doping. The doped region showed a much higher intensity in 004 dark-field images. The characteristic high intensity was observed for specimens with As concentrations of about 0.09-0.8 at.%. Convergent-beam electron diffraction patterns obtained from the As-doped region showed a characteristic rocking curve for 004 reflection. These characteristics should originate from incoherent elastically scattered electrons due to a static lattice distortion around the doped As atoms. The observed characteristics in dark-field images and rocking curves of the 004 reflection should be a good probe not only for investigating the concentration of doped atoms in Si lattice, but also for the amount of impurity and/or point defects in other crystalline materials.     

A novel assay method for glycosphingolipid deacylase by enzyme-linked immunochemical detection of lysoglycosphingolipid

Lysoglycosphingolipids consist of a sphingoid long-chain base and monosaccharide or complex sugar, and they lack the fatty acyl group present in native glycosphingolipids. Less than 1 pmol of lyso-Forssman glycolipid and lysoganglioside GM1 were detected on a thin-layer chromatogram by an enzyme-linked immunochemical coloration method with anti-Forssman glycolipid antibody (FOM-1) and cholera toxin B subunit, respectively. Each spot between 1 and 100 pmol lyso-Forssman glycolipid was immunostained as densely as that of the same amount of native Forssman glycolipid. The density of the lyso-Forssman glycolipid spots increased proportionally with increment in the amount of lysoglycolipid. The density of spots of 0.2–100 pmol lysoganglioside GM1 was also proportional to the amount of each lyso-GM1 spot. These results indicated that less than 1 to 100 pmol of deacylated glycosphingolipid was quantifiable by the immunochemical coloration method with sugar chain-specific antibodies. Glycosphingolipid deacylase, which cleaved an amide bond between the sphingoid long-chain base and fatty acyl chain in ceramide of glycosphingolipid, was assayed by detecting the lyso-Forssman glycolipid produced. Lipophilic compounds, recovered from an aliquot of the reaction mixture of Forssman glycolipid and crude enzyme at appropriate times, were analyzed by thin-layer chromatography. It was found that lyso-Forssman glycolipid was produced in the first 1–2 h by the enzyme and production increased with incubation time. This coloration method is more sensitive and specific than the visualization method with a non-specific reagent such as orcinol-sulfuric acid reagent.     

A decentralized control system for cooperative transportation by multiple non-holonomic mobile robots

In this paper, we propose a decentralized control system for transporting a single object by multiple non-holonomic mobile robots. Each agent used in the proposed system has two arms, which can steer around a joint offset from the centre point between two driving wheels. One of these mobile robots acts as a leader, who is assumed to be able to plan and to manipulate the omnidirectional motion of the object by using a resolved velocity control. Other robots, referred to as followers, cooperatively transport the object by keeping a constant relative position with the object using a simple PI control. Different from conventional leader–follower type systems that transport an object by multiple robots in coordination, the present followers can plan an action based on their local coordinate and need no absolute positional information. In addition, as a special case, a system consisting of only two robots is introduced, in which the follower robot not only has an arm length controller to follow the leader but also has a fuzzy controller as an avoidance controller to avoid obstacles or a posture controller to keep a desired posture of the object. Simulation results are given to demonstrate the good performance of the proposed systems.     

Vacuum seal for a rectangular flange

A new vacuum seal for a rectangular flange used in r.f. equipments, was developed. The vacuum seal consists of a recess with a flat surface, machined into a rectangular flange, a rectangular metal gasket with a raised projection on one face, and a mating flange with a recess and raised projection. No leak greater than 1 × 10⁻¹⁰ Pa m³/s was found in leak tests, before and after baking cycles (100 °C, 12 h).     

Polar-Polar Interaction and Boundary Phase Structure Between Reinforcement and Matrix in a Polymer Composite

This paper describes an attempt to correlate the nature of polar-polar interaction between the reinforcement and matrix in a polymer composite with the boundary phase structure formed in contact with the reinforcement. It is shown by analyzing the mechanical dispersion data that the reinforcement-matrix interaction of Kevlar fiber reinforced poly(hydroxypropyl ether of bisphenol A) (P) is increased by blending poly(ethylene oxide) (E) or poly(ethylene adipate) (A) as a part of matrix, and that E is more efficient than A for the increase of the interaction. These results can be supported at the molecular level from the inspection of the Fourier transform infrared spectra on the Kevlar fiber coated with matrix polymers and the mixture of matrix polymers with benzanilide, which is used as a model compound of Kevlar fiber. It can be shown from the electron spectroscopy for chemical analysis on the films of PIE and P/A blend polymers formed on nylon 6 substrate (N), which is also used as a model material for the reinforcement, that A concentrates on the N-facing side for P/A film and that E concentrates on the air-facing side for PIE film. This result indicates the different susceptibility between P/A and PIE blends to the surface force from N, and hence, it likewise indicates the different interaction with the reinforcement in each blend, as shown by the mechanical dispersion data.